Please contact for updated pricing. 800-844-1885
:: VIBRATORY TUBS
M.C. Finishing sells Almco, Burr Bench, C&M-Topline, Roto-Finish, and Vibe Tech vibratory tubs and in-line automated tubs.
MODEL SVP 5 MAXIMUM CAPACITY
5 Cu. Ft.
Unit: 35-1/14”H x 23”W x 52-1/2”L
Tub: 15-5/8”D x 15-1/4”W x 44-1/2”L
Lining: 5/8” Urethane
Power: 230/460V, 1-1/2HP, 2700
Sound Insulating and sound cover
RPM, 3 Phase Weight: 730 lbs
Shown with optional dividers installed.
High Quality • Portable • Quiet
Shown with optional dividers installed
MODEL SVP 2.5 MAXIMUM CAPACITY
2-1/2 Cu. Ft. Unit:
35-1/2”H x 22-1/2”Wx27”L
Tub: 15-3/4”D x 15-1/2”W x 19 3/4”L
Lining: 1/2” Urethane
Power: 110V, 1HP, 2700 RPM
Timer: 0-1 Hour or 0-12 Hour (both with hold feature) Sound Insulating and sound cover
Heavy duty locking casters.
Weight: 350 lbs
Shown with top sound cover.
High Quality • Portable • Quiet
Shown with top sound cover
BOTH MACHINES ARE AVAILABLE IN SINGLE OR THREE PHASE
BOTH MACHINES• 5’ round discharge door with discharge trough
• Heavy gauge steel construction coated with rust preventive enamel paint
• Sound reduction cover and anchor bolts
• Polyurethane liner made from the finest quality material available and oven cured
• Complete fluid circulation system including pump, fluid container, all necessary hoses and fittings.
MODEL 300DB AVAILABLE IN SINGLE OR THREE PHASE
MODEL 300DB
• Inside tank dimensions: Length 31” Depth 13”, Width 13-1/2
• Motor: 1HP, Single Phase, 110 Volts, or 220 Volts
• Weight: 400 lbs.
MODEL 600DB AVAILABLE IN SINGLE OR THREE PHASE
• Inside tank dimensions: Length 35” Depth 18-3/4”
• Width 18 Motor: 3HP, Three Phase, 230 Volts, or 440 Volts
• Weigh: 700 lbs.
For more aggressive deburring applications
From wing spars for mammoth aircraft to small parts that can be finished by the thousands in a single load, this uniquely flexible method produces exceptionally fine results - particularly in processing parts with blind or recessed areas. The machine’s variable speed and adjustable eccentric weights can be closely adjusted to vary the vibratory forces to exacting degrees.
VibeTech High Quality Large Vibratory Tubs
Premium Efficiency Motor
Premium Poly-Urethan
Easily Adjusted Weights
Increase or Decrease Aggression
Thick Wall Tubing Base Frame
Model 1760
17” Dia x 60” L
Model 2460
24” Dia x 60” L
800-844-1885 for Pricing
Other Sizes Available From 30” Dia to 60” Dia x Any Length
Systems for High Production Precision Deburring and Finishing
Thru-feed machines are integrated with material handling systems including an oscillating parts-media separator, incorporating a secondary “fines” removal deck and a media return conveyor - for complete automatic processing of high production parts. Parts may be fed into the machine at short intervals, direct from preceding operations. Systems are ideally suited for incorporating washer, dryer, or rust- inhibiting operations. These systems are specifically designed for processing parts on a thru-feed basis, requiring process cycles of from 3 to 20 minutes, depending on part size and finishing demands.
Burr Bench Metal Finisher: Model 914
Burr Bench Model 914Unit: 31-3/4" high x 20-3/4" wide x 15-3/4" long
Tub: 11-3/4" deep x 13-3/4" wide x 8-5/8" long
3/8" Urethane lining; Volume: 3/4 cu. ft
Power: 110 V, 3/4 Hp, 2700 rpm
Shipping Wt: 130 lbs.
Burr Bench Metal Finisher: Model 2016
Burr Bench Model 2016Unit: 35-1/2" high x 22-1/2" wide x 27" long
Tub: 15-3/4" deep x 15-1/2" wide x 19-3/4" long
1/2" Urethane lining; Volume: 2-1/2 cu. ft
Power: 110 V, 1 Hp, 2700 rpm
Shipping Wt: 350 lbs.
Burr Bench Metal Finisher: Model 4616
Burr Bench Model 914 Unit: 35-1/4” high x 20" wide x 52-1/2” long
Tub: 15-5/8” deep x 15-1/4” wide x 44-1/2” long
3/8" Urethane lining; Volume 5 cu.ft.
Power: 230/460 1 1/2 Hp, 2700 rpm
Shipping Wt: 750 lbs.
