Please contact for updated pricing. 800-844-1885
:: CLEANING EQUIPMENT

AQUEOUS PARTS WASHERS

EcoMaster 5000

25 Gallon Aqueous Drum Mounted Parts washer
Corrosion resistant heavy-duty pump
Spigot with adjustable fluid control
Flo-thru brush with adjustable fluid control
Designed for easy servicing – parts washer can be removed from fluid reservoir in minutes
Reservoir engineered to provide excellent tank stability
Long lasting heavy-duty roto-cast thermoplastic parts washer and fluid reservoir – built to last
Filter system prolongs fluid life. Filter cartridge p/n 7062
Automatic thermostat preset to 110 degrees
Low level fluid sensor
Stainless steel lid door closure
Ground fault circuit interrupter for added safety
Heater, pump, thermostat and fluid level sensor mounted in reservoir for easy tank service
115 volt, 15 amps
Operating fluid capacity 25 to 30 gallons
Dual switches – heater and pump

25 Gallon
115VAC
60HZ
1PH
15Amps
Tank Dimensions 22"W x 36"L x 10"D
Overall Dimensions 34"W x 43"L x 63"H
Shipping Dimensions 34"W x 40 1/2"L x 39"H
Shipping Weight 170lbs.
25 Gallon Aqueous Drum Mounted Parts washer
Stacks Image 3662

Ecomaster 5000

SprayMaster 9200SS

30 Gallon Top Loading Spray Cabinet
Large 24” turntable
23” inside working height
High volume 1.0 H.P. pump with stainless steel impeller
4.5 kw heating capacity
Adjustable cycle timer from 0 to 60 minutes
Stainless steel gasket-free lid for maintenance free operation
Large 30 gallon reservoir capacity
Friction turntable drive
Liquid level sensor
Movable top arm for easy loading and unloading
KT9200SS comes with a stainless steel cabinet
Picture of S.S. standard unit has painted tank

Overall Dimensions: 36"L x 34"W x 50"H
Inside Dimensions:
Shipping Dimensions:
Shipping Weight: 300lbs.
230V/60Hz/1Ph
30Amp.
1H.P. Pump
30 Gallon Top Loading Spray Cabinet
Stacks Image 3664

SprayMaster 9200 Carbon Steel

\

SprayMaster 9200SS Stainless Steel

SprayMaster 9600SS

85 Gallon Front Loading Spray Wash Cabinet
Large 30” turntable
40” inside working height
High volume 3.0 H.P. pump with stainless steel impeller
9.0 KW heating capacity (2 heaters)
Adjustable cycle timer from 0 to 60 minutes
Adjustable heat timer allows you to keep solution hot overnight
Stainless steel gasket-free front door provides maintenance free operation
Large 85 gallon fluid capacity
12” disc skimmer with 45 minute timer
Center spray bar folds down for cleaning of smaller parts
Large 500 lb. weight capacity
Friction turntable drive will not break if a part becomes lodged
Liquid level sensor automatically turns off heaters before they burn out
Removable tree rack standard
Stainless steel nozzles for lower maintenance cost
Portable with (4) casters
Shown in Stainless Steal

Overall Dimensions: 50"W x 42"L x 68"H
Inside Dimensions:
Shipping Dimensions:
Shipping Weight:
220Vac
60Hz
1PH
60Amp
85 Gallon
Load Capacity: 500lbs.
30" Turntable
3HP Pump
9KW Heating Capacity 2Heaters
85 Gallon Front Loading Spray Wash Cabinet
Stacks Image 3666

SprayMaster 9600 Carbon Steel



SprayMaster 9600SS Stainless Steel

SprayMaster 9800SS

125 Gallon Front Loading Spray Wash Cabinet
40” turntable
52” inside work height
13.5 KW heating capacity (3 heaters)
Adjustable cycle timer 0 to 60 minutes
Stainless steel gasket-free front door provides maintenance free operation
Large 125 gallon capacity
12” disc skimmer with 45 minute timer
Large 1250 lb. capacity
Liquid level sensor automatically turns off heaters before they burn out
22 stainless steel nozzles
High volume 5.0 H.P. pump 140 GPM at 50 PSI
Adjustable heat timer allows you to keep solution hot overnight
220V 3 phase voltage
All stainless steel tank and cabinet
Center spray bar folds down for smaller parts
Optional 7-day timer feature
Optional automatic fill feature
Removable tree rack standard

Overall Dimensions: 54 1/2"W x 60"L x 77"H
Inside Dimensions: 40" turntable 52" working height
Shipping Dimensions:
Shipping Weight: 950lbs.
220Vac/60Hz/3PH
125 Gallon Front Loading Spray Wash Cabinet
Stacks Image 3668

SprayMaster 9600SS


EcoMaster AL80AQ

80 Gallon Agitating Lift Water Based
Heavy Duty Agitating Parts Washer
Heavy duty steel construction for long lasting durability
Self-cleaning agitating platform lifts parts to top
Easy loading and unloading
Filter regulator with auto drain
Adjustable agitation speed
Flow-through brush with polyester filaments for the toughest water-based cleaning applications.
Durable, baked on powder coated epoxy finish
Not to be used with chlorinated solvents
Stainless steel spring-loaded door closures
Thermostat is preset to deliver optimal cleaning temperature of 110°F
Includes backup thermostat (non-adjustable)
6,000-Watt heater
Electrical plug not included
Stainless steel

Fluid Capacity: 80 Gallons
12 Gauge Construction
Platform Dimensions: 17 1/2"W x 41 1/2"L
Overall Dimensions: 34"W x 52 1/2"L x 66 1/2"H
Tank Dimensions: 27"W x 44 1/2"L x 38"H
Fluid Level: 12"
Load Capacity: 250 lbs.
Lift Requirements: 8CFM@120PSI
115VAC
60HZ
1PH
1Amp
Shipping weight: 556 lbs.
Pump/Motor HP: Fractional
80 Gallon Agitating Lift Water Based
Stacks Image 3670

EcoMaster AL80AQ


EcoMaster AL150AQ

149 Gallon Heated Agitating Lift Aqueous Parts Washer
Heavy duty steel construction for long lasting durability
Self-cleaning agitating platform lifts parts to top for easy loadingand unloading
Filter regulator with auto drain
Adjustable agitation speed
Flow-through brush with polyester filaments for the toughest water-based cleaning applications.
Durable, baked on powder coated epoxy finish
Not to be used with chlorinated solvents
Stainless steel spring-loaded door closures
Thermostat is preset to deliver optimal cleaningtemperature of 110°F
Includes backup thermostat (non-adjustable)
6,000-Watt heater
Electrical plug not included
Stainless Steel

Overall Dimensions: 44 1/2"W x 64"L x 66 1/2"H
Inside Dimensions: 37 1/2"W x 57"L x 37 1/2"H
Shipping Dimensions: 36"W x 41"L x 37"H
Fluid Level: 18"
Platform Dimensions: 28"W x 54"L
Shipping Weight: 1115lbs.
Load Capacity: 750lbs.
Lift Requirements: 25CFM At 120PSI
Pump HP: Fractional
230Vac 60Hz 1PH
Pump: 1Amp
Heater: 30Amp
Heater: 3000 Watt
Pump/Motor HP: Fractional
149 Gallon Heated Agitating Lift Aqueous Parts Washer
Stacks Image 3672

EcoMaster AL150AQ



INDUSTRIAL SPIN DRYERS

K11-6x6basket


K24-12x12basket


K11-18x18basket


Prices include electric heat.
Baskets not included.
Stacks Image 3673
Stacks Image 3674

MULTI-STAGE IN-LINE CONVEYOR

Discharge end of parts washer showing stainless steel blow off section with stainless steel
Discharge end of parts washer showing stainless steel blow off section with stainless steel moisture blow-off header and drive unit.

ROTARY DRUM PARTS WASHER

unique units are for continuous small parts cleaning and drying

ALMCO
- the leader in supplying industrial washers and dryers also excels in design applications for rotary drum parts washers and dryer systems. These unique units are for continuous small parts cleaning and drying when other type conveyor belts or basket applications won’t work.
Parts are spiraled through the cleaning drum chamber via the helix and are both submerged in liquid and sprayed via a nozzle-equipped manifold for complete tumbled cleaning. This unit is a complete feed-thru operation, which allows for parts to be fed directly from the washer section to a rotary drying system if required.
MULTI-STAGE U-BEND PARTS WASH/RINCE/BLOW-OFF
Features

FEATURES:

• Three stage wash, rinse or inhibit, and blow-off
• Variable speed 6" wide stainless steel belt with 1" x 1" openings
• All stainless steel construction
• Patented cyclonic filtration/air hydro skimming feature
• 36" long wash section with 135 gallon insulated tank
• 70 gallon, 24" long rinse section shown on the 180 degree turn of machines U-shaped conveyor frame
• 36" long moisture blow-off section with 5HP regenerative blower
• Automatic solution make-ups system

Filtration Options:

• Cyclonic with Air Hydro Skimmer feature
• Cartridge
• Bag
MULTI-STAGE U-BEND PARTS WASH/RINCE/BLOW-OFF
MODEL PWB6-36E-U

BENCH TOPS (WITH BUILT IN GENERATORS)

All stainless steel construction
EVERYTHING YOU NEED IN ONE EASY TO USE PACKAGE
Features include:
• Many ultrasonic cleaner sizes are designed to fit all of your application needs
• All stainless steel construction • Adjustable thermostat with power on light
• Bottom mounted "VIBRA-BAR®" ultrasonic transducers
• 40 kHz Simultaneous Multi-FrequencyTM" ultrasoniccleaning components
• Ten years guarantee on transducers, one full yearguarantee on tank, two years on the generator
• Made in the USA • In stock- ships in one to ten days depending on options
Capable of Continuous Operation
BENCH TOPS (WITH SEPARATE GENERATORS)
Features include:
Ultrasonic Generators
• 40 kHz Simultaneous Multi- Frequency ultrasonic cleaning parts (optional 68/170 kHz)
• 500, 750, 1000 Watts 120 VAC 50/60 Hz (optional 230/240 Volt)
• Capable of Continuous Operation
• Power Intensity Control
• 4 kHz Sweep Output with Adjustable Sweep Rate 300 to 1000 Hz
• Protected from Shorts or Opens in Output
• Dimensions of 5.25" W x 13.75" L x 12.5" H (13.3 cm W x 34.9 cm L x 31.75 cm H)
• Optional I/O Control Signals
• Full Two Year GuaranteeHeavy Duty Cleaning Tanks
• 14 Gauge, 316 L Stainless Steel Double Wall Construction
• 60 - 250 Degree F (31.5 - 121.1 Degree C) Adjustable Thermostat with Power on Light
• 6 Foot Coaxial Cable Connecting to Generator (longer cables up to 50 feet available)
• Bottom Mounted "Vibra-Bar" Ultrasonic Transducers
• Brass Drain Ball Valve • Full One Year Guarantee • Ten Year Transducer Guarantee
• Custom Size Available From 800-844-1885 for Pricing
Stacks Image 3684
STANDARD 39, 90, OR 135 GALLON CLEANING TANKS
Features include:
• Available in three standard sizes
• All stainless steel construction
• Available for 120V or 230V 50/60 Hz operation
• Leading edge technology
• Able to clean interior surfaces
• Better than mechanical cleaning
• Penetrates into cracks and crevices
• Suited to a wide variety of applications
• Best where extreme cleanliness is required
• Manufactured entirely in the USA using UPCORP transducers and generators
Stacks Image 3685
Item Name

30 Gallon Standard Cleaning System
90 Gallon Standard Cleaning System
135 Gallon Standard Cleaning System
Demensions
(W x L x D)
23.15” x 40.65” x 39”
26” x 61” x 42”
26” x 61” x 42”
Capacity

39 Gallon
90 Gallon
135 Gallon
Weight (Dry)

150 lbs
375 lbs
500 lbs
List Price

800-844-1885 for Pricing
This ultrasonic cleaning system is designed as a precision ultrasonic cleaning system
AUTOMATED FOUR STAGE ULTRASONIC CLEANING AND HOT AIR DRYER SYSTEM SPECIFICATION

This ultrasonic cleaning system is designed as a precision ultrasonic cleaning system. The system provides for a three stage cleaning process & a hot air dryer. The second and third stages are a spray rinse and an immersion rinse tank with ultrasonics. The fourth stage is a separate hot air dryer console. Parts are manually or via automation transported through the wash, rinse and dry process.
Stacks Image 3688