:: PEDESTAL SANDERS
2” x 48” belt. Vertical or Horizontal Position sander.
2FSM 2” SANDER MULTI-POSITION VERTICALOR HORIZONTAL

2” x 48” belt. Vertical or Horizontal Position.
1/2 HP motor, 3450 RPM, direct drive, 5” contact wheel
Tilt work table, removable platen
Full hinged OSHA guard for quick belt charge.
Pre-set belt tension, one knob belt tracking
4500 SFPM belt speed, WT. 48 lbs.
Model: 2FSM
Stacks Image 40

Model: 2FSM


$427





1” Belt sander, with 1/3 HP Motor at 1725 RPM
1SM 1” BELT SANDER

1/3 HP Motor
1 PH. 1725 RPM
1” x 42” belt
4” contact wheel
Tilt table - vertical sander only
1800 SFPM
32 lbs
Stacks Image 49

Model: SM1


$274





All-purpose 1/2 HP belt sander for wood, metal and plastics.
S4S

All-purpose for wood, metal and plastics.
1/2 HP, 1 phase (1 HP available, #S4S-1)
Vertical or horizontal position.
3450 RPM
4” x 36” Belt with
Full OSHA Guards
Stacks Image 58

Model: S4S

$641





Floor sander 6” x 48” belt, variable positions, direct drive.
S6MS, 6” BELT SANDER

Industry standard. 3 HP!! Real workhorse!! Every shop needs one!!
Also available in 5 HP and in 6” x 60” belt!
6” x 48” belt, variable positions, direct drive, 1 lever quick belt release!!!
Cast iron frame. Full OSHA safety guard. Heavy duty steel stand.
3 HP motor 3450 RPM. 1 phase or 3 phase, manual switch.
3500 SFPM Reversible platen 6 1/2” x14” Cast iron work table 6” x 10” with 1/2” x 1/8” slot

$1,195 - Model: S6M-1 3hp, 1 phase, 220, LESS stand
$1,195 - Model: S6M-3 sander, 3 hp, 3 phase, LESS stand
$1,349 - Model: S6MS-1, 3 hp, 1 phase, 220 volt, w/Stand
(110 volts @ 34 amps.)
$1,349 - Model: S6Ms-3, 3 hp, 3 phase, 220/440 volt, w/Stand

Stacks Image 69

Model: S6MS

$1,610





Belt grinder offers multi-position contact from vertical to horizontal and full work movement from left to right.
BG248, BELT GRINDER

Kalamazoo Industries has added the model BG248 belt grinder to its growing line of grinders. This grinder offers multi-position contact from vertical to horizontal and full work movement from left to right. The grinder features a 2” x 48” grinding belt with an 8” x 2” contact wheel work surface, a 2-3/4” x 8-3/4” removable platen and work table, and a 70 Duro serrated contact wheel. Over all dimensions are 12” long x 16” wide x 26” high.
The grinder is supplied with a 1/2HP TEFC 1PH, 110V motor and produces a belt speed of 7200SFPM.
Stacks Image 8544

Model: BG248

$745.00





2" belt grinder.
BG272, 2” BELT GRINDER

Open area design for easy access. 2” x 72” belt
Throat dimensions: H 10” x D 13”
Dimensions: L 24” x W 12” x H 24”
7200 SFPM belt speed, 5” lower
contact wheel, direct drive.
Easy belt tracking
1 HP TEFC, 1PH
(110/220V) monitor. Manual
switch, Wt: 80 lbs.
Stacks Image 78

Model: BG272

$1,492





:: MULTI-PURPOSE BELT GRINDER
Bench model belt grinder machine for grinding, shaping, contouring and flat work.

MODEL S272V


One machine for:
• Grinding • Shaping • Contouring
• Flat work • Angles • Snagging• Roughing

• Versatile – quick change contact
wheel (3" and 1-1/2") with various
angles. Easy to change.
• L 27" x W 18" x H 40".
• SFPM 5400.
• 2" x 72" belt.
Platen rotates
360° for many
different shapes of
sanding.

$1,295 - MODEL S272 2" X 72" belt grinder. Bench model, 1 HP. 1 PH or 3 PH, please specify. Manual switch. Wt. 110 lbs.
$1,449 - MODEL S272S. Same as above but with heavy-duty stand legs. Wt. 170 lbs.
$2,290 - MODEL S272V. Same as S272 only mounted on DCV-6 dust collector. Wt. 350 lbs.

Stacks Image 92

MODEL S272V

$2,607






:: 6" X 90" BELT GRINDER
Belt sander floor model
MODEL KS690HV


• 6"w x 8" diameter 70 duro serrated contact wheel.
• 6" x 24" platen for flat work.
• 7200 SFPM.
• 400 CFM vacuum base.
• Air belt tension.
• Manual switch.
• Spark chute horizontal/vertical.
• Dimensions —W 18" x D 26" x H 42".

MODEL KS690 5 HP, 3PH TEFC motor, 220 or 440 volt (please specify). No vacuum base. Wt. 400 lbs.
MODEL KS690HV 5 HP, 3PH TEFC motor, 220 or 440 volt (please specify). Vacuum base. Wt. 600 lbs.
Stacks Image 103

MODEL KS690

$4,474


MODEL KS690HV

$5,866





:: WHEEL BELT GRINDERS
Burr King

Burr King's family of three wheel grinders provides maximum versatility. Contact wheel, platen, work rest support, and loose belt grinding are precision controlled with positive belt tracking, quick belt change, and linear belt tension.

Model 482 2 x 48 Three Wheel Belt Grinder


Standard 48” Belt
Up to 2” Wide

40100 Shown
Stacks Image 15086

MODEL 482

$1,928


1 HP 120V







Stacks Image 15113


Constructed of rugged cast aluminum and precision machined components, every Burr King grinder delivers unexcelled grinding performance and reliability.

Model 979 3 x 79 Two Wheel Belt Grinder


Shown with optional mag starter.
Pedestal included.

17313 Shown
Stacks Image 15117

MODEL 979

$5,238


3 HP 220/1







This grinder delivers unexcelled grinding performance and reliability


Model 979 3 x 79 Two Wheel Belt Grinder


Standard 42” Belt
Up to 1” Wide

Model 562 shown with optional dust scoop (DS-5) & pedestal
Stacks Image 15148

MODEL 562

$1,785


3/4 HP 120V







These two wheel grinders provides vigorous contact wheel, workrest, and platen grinding

Burr King's family of two wheel grinders provides vigorous contact wheel, workrest, and platen grinding in a frame design that pivots to ideal work positions.

Model 960-400 4 x 60 Two Wheel Belt Grinder


Standard 60” Belt
Up to 4” Wide

95103 shown with optional mag starter

Stacks Image 15179

MODEL 960-480

$3,364


2 HP 220/1







Burr King


Burr King's family of three wheel abrasive belt grinders provides maximum versatility. Contact wheel, platen, work rest support, and loose belt grinding are precision controlled with positive belt tracking, quick belt change, and linear belt tension.

Model 760 1.5 x 60 or 2 x 60 Three Wheel Belt Grinder


Shown with optional variable speed

72110 shown


Stacks Image 15210

MODEL 760

$2,361


1.5 HP 120V






:: INDUSTRIAL ABRASIVE BELT SANDERS
Industrial abrasive belt sander lineup
Stacks Image 114
:: FLEX SHAFT GRINDERS
This Floor Model is useful for the moving around the machine the shop

The A-6s is the Floor Model. This is on the round base with the casters to allow it to roll around.

The Floor Model is most useful if you need to move the machine around the shop or the workpiece.

Model A-6s SINGLE SPEED FLEXIBLE SHAFT MACHINE






MODEL A-6s

$1,841






Portable and can be dragged or carried around
Model SCH-6s


The SCH-6s is the Skid Model. This is the type on the the frame with the runners on the bottom and the handle across the top. It is very portable and can be dragged or carried around.


Model A-6sps

The A-6sps is the same as the SCH-6s except that it is does not have the skid frame. The electric motor has a mounting flange on the bottom to allow it to be bolted down or hung overhead from a hook or chain.
All of the options can use the same Flexible Shaft and Handpiece with Adapters.
Handles
Adapters

MODEL SCH-6s

$1,281



MODEL Model A-6sps

$1,214