:: POLISHING BUFFING
Great deals on Industrial Buffers
Stacks Image 947
Grinder and Buffer Pedestals
Pedestals for bufffers and grinders
Stacks Image 949
:: GRINDING SANDING POLISHING
Polishing lathes
POLISHING AND BUFFING LATHES - SET AND VARIABLE SPINDLE SPEED UP TO 20 HP.
5 HP SINGLE SPEED $10,260–WITH VARIABLE SPINDLE $12,885
7 HP SINGLE SPEED $11,430–WITH VARIABLE SPINDLE $13,795
10 HP SINGLE SPEED $11,575–WITH VARIABLE SPINDLE $14,205
Stacks Image 951
VS models are variable speed, the SS models are single speed.
Stacks Image 953
VARIABLE SPEED 5 - 7.5 - 10 HORSEPOWER

SINGLE MOTOR OR DUAL MOTOR MODELS AVAILABLE

Standard Features

The VS models are variable speed, the SS models are single speed. Variable speed is accomplished with the use of a variable pitch pully on a sliding motor base and a wide vee belt.

• Electronic tachometer on the VS models.
• Heavy Duty fabricated steel base.
• Spindle lock on each side. (Spindle brake optional).
Magnetic push button starters (NEMA 12 optional).
• 1 1/2" x 6" or 11" long spindles.
Stacks Image 954

Model: VS 500

$8,370

Single Speed

$6,850



Model: VS 700

$9,400

Single Speed

$7,540



Model: VS 1000

$9,220

Single Speed

$8,010



PN & PW SERIES SPINDLE STANDS
PN & PW SERIES SPINDLE STANDS
NEVER OPERATE SPINDLE STANDS WITHOUT PROPER GUARDING.

MODEL PN (Narrow Type) requires minimum amount of space. Shorter overall spindle length.

MODEL PW (Wide Type) provides maximum spindle clearance. Ideal for applications requiring an operator working each spindle.

Shown with pneumatic drum and Wolfhead
Stacks Image 957

Model: PW-2

$4,350

Model: PW-3

$4,380

Model: PW-5

$4,480



Model: PN-2

$3,600

Model: PN-3

$3,640

Model: PN-5

$3,710




:: GUARDS
All polishing and sanding wheels must be guarded to protect the operator. Operating without guards may lead to serious injury. This is stated in a warning sign attached to every machine. G&P offers guards as listed below. Prices for guards will be supplied upon receipt of details of the application.
GUARDS–For Mounting On Machine
GUARDS–For Mounting On Machine

Designed for mounting to the side of the base, or to the bearing housing_features include hinged door, exhaust outlet, and adjustable scoop.
For use with buffing and polishing wheels. Open bottom also available.
clear of the wheel and spindle, providing easy access for wheel changing.
TYPE A - Cover swings clear of the wheel and spindle,
providing easy access for wheel changing.

TYPE B - Door swings open for wheel access.

Both have adjustable scoop, clean out door and exhaust outlet for connection to dust collector.
Stacks Image 960

Model: Mount Guard

$650

Model: Free Standing Guard

$1460



The SBS series of back stand idlers is an economical method of tensioning an abrasive belt for manual grinding applications
SERIES SBS (Replaces RBS) SPRING TENSIONED
The SBS series of back stand idlers is an economical method of tensioning an abrasive belt for manual grinding applications. Tension is provided by a torsion spring. The 6" dia. pulley is machined from an aluminum casting, and rotates on sealed ball bearings. The arm and base of the back stand are made of cast iron.

Model SBS-4 for belts of 4" wide or less
Model SBS-6 for belts of 6" wide or less
Stacks Image 962

Model: SBS 4"

$660

Model: SBS 6"

$685




This accessory, offers advantages over the typical method of mounting the idlers on the floor
OPTIONAL CONTACT WHEEL AND BELT ATTACHMENT

This accessory, as shown in the picture at the right offers advantages over the typical method of mounting the idlers on the floor.

Because the contact wheel, backstand idlers and guards are all mounted to a support frame that is secured to the base of the machine, it is possible to move or relocate the lathe without remounting or realigning the idlers. The Contact Wheel and Belt Attachment can only be supplied if ordered at the same time as the polishing lathe.
Available with Spring Tensioned idlers or Air Tensioned idlers. The Air Tensioned idlers are recommended for belt speeds of 7500 SFPM and faster due to larger diameter pulleys.
Stacks Image 964

Model: Belt Adaptor 2"thru 4" Belt Width x 72" Long

$2,340


Polishing Lathe 250-2500 RPM Variable Speed 1-1/2 HP
Model 1001 Polishing Lathe Variable Speed Buffer

Shown with variable speed 10" x 2" arbors
250-2500 RPM Variable Speed 1-1/2 HP

**The M1001 has optional dust scoops available for purchase.
Stacks Image 15857

Model: 1001

$2,978


:: FLEX SHAFT GRINDERS
This Floor Model is useful for the moving around the machine the shop

The A-6s is the Floor Model. This is on the round base with the casters to allow it to roll around.

The Floor Model is most useful if you need to move the machine around the shop or the workpiece.

Model A-6s SINGLE SPEED FLEXIBLE SHAFT MACHINE






MODEL A-6s

$1,841






Portable and can be dragged or carried around
Model SCH-6s


The SCH-6s is the Skid Model. This is the type on the the frame with the runners on the bottom and the handle across the top. It is very portable and can be dragged or carried around.


Model A-6sps

The A-6sps is the same as the SCH-6s except that it is does not have the skid frame. The electric motor has a mounting flange on the bottom to allow it to be bolted down or hung overhead from a hook or chain.
All of the options can use the same Flexible Shaft and Handpiece with Adapters.
Handles
Adapters

MODEL SCH-6s

$1,281



MODEL Model A-6sps

$1,214