:: POLISHING, BUFFING, and DEBURRING
OD-2 CYLINDRICAL FINISHER
UP TO 9" DIA. Abrasive Belt and flexible wheel.
OD-2 CYLINDRICAL FINISHER, for outside diameter surface improvement of shafts, tubes, rods and other round parts
Outside diameter cylindrical finisher for outside diameter surface improvement of shafts, tubes, rods and other round parts. The OD-2 operates on the Centerless principle and is designed for simple set-up and operation. It's designed to Buff, Brush, or Polish using a wide variety of medias and features:

* Construction — Cast Iron base and head components
* Part capacity — 0 to 2" diameter parts
* Feed rates — Variable 0 to 55 feet per minute
* Spindle Drive — 5 or 7 1/2 HP
* Spindle arbor size — 1 1/4"
* Spindle wheel size — 12" diameter x 4" or 6" face
* Regulating head style — Floating pivot
* Regulating head drive — DC variable speed
* Regulating roll size — 6" diameter x 4" or 6" face
* Regulating head angle — 0 to 15 degrees
* Work rest blade — 6" long carbide, nylon, or felt
* Height from floor to work — 39"
* Floor space required — 51" x 68"
* Weight — 1550 pounds

OD Parts FinisherOPTIONS AVAILABLE

* Both wet and dry processing configurations
* Abrasive belt unit with air tensioning
(4" wide x 90 " long)
* Part guides
* Electronic wheel wear compensation
* Automatic compound application
* Automatic feeding systems
* Automatic reversing regulating head
* Automatic transfer between machines
* Monorail fixturing for complex parts
* Dust collection
* Filtered Recirculation of coolant
Stacks Image 1086
LATHE MOUNTED POLISHERS that CONVERTS LATHE INTO O.D. POLISHER
LATHE MOUNTED POLISHERS
CONVERTS LATHE INTO O.D. POLISHER 3H.P.
Stacks Image 1088

Model: 3 H.P.

$3,995

THE BT 25 CYLINDRICAL DEBURRING AND FINISHING SYSTEM
CYLINDRICAL DEBURRING AND FINISHING SYSTEM
Stacks Image 1090
Typical Component Parts
Standard Features

• 110 volt, single phase electrics
• 1 HP spindle motor with 1" spindle
• 1/4 HP drive motor
• Variable speed through-put, up to 20 FPM
• Handwheel height $ pressure adjustment
• Amp meter
• Adjustable side support for for shoulder polishing
• UHMW guide blades
• Two (2) dust collection pickups
• Accomodates 2,"8, 10" X 12" diameter wheels


Optional Equipment

• Pop-up head for selective polishing
The BT 25 is a portable bench top machine for light-duty applications as found in job shops, small businesses, and a variety of light manufacturing environments.
Stacks Image 1091

Model: BT 25 DRY

$9,500

THE BT 50 CYLINDRICAL DEBURRING AND FINISHING SYSTEM
The BH 50 is a centerless, outside diameter finishing machine used in many diverse applications.
The BH 50 is a centerless, outside diameter finishing machine used in many diverse applications. Available in wet or dry configurations with single or multiple heads.
Typical Component Parts

Standard Features
• 5 HP spindle motor with 1-1/4" spindle
• 1/3 HP drive motor with variable speeds up to 30 FPM
• Handwheel height & pressure adjustment
• Easy to use push button controls
• Amp meter
• Handwheel adjusted belt tracking
• UHMW guide blades
• Two (2) dust collection pickups
• Accomodates 4" X 12" diameter wheels & 4" X 90"
abrasive belts
• Safety interlocks & E-Stop
• Made In USA

Optional Equipment
• Pop-up head with foot pedal control
• Handwheel adjusted guide blades
• Spring-loaded hold down rollers
• Manual & automatic lubrication systems
• Buffing compound applicator
Stacks Image 1093
Stacks Image 1094
Stacks Image 1095

Model: BH 50

$31,900