Magnetic Spinner Deburring

                                                         Magnetic Spinner deburring

We are manufacturing small machined precision parts from aluminum and stainless. The parts have knurled areas, slots, and small drilled holes that are time consuming to hand deburr. Is there a machine that can deburr these intricate areas.

Our first recommendation for deburring small, non-ferrous parts with intricate burrs is the magnetic spinner.

The spinner is a newer technology with excellent high-energy process capabilities for non-magnetic parts. The spinner process removes hard to reach external burrs and shallow cavities with interior burrs.

The magnetic spinner achieves its energy from a high speed (reversible) rotating magnetic plate positioned under the tub container of parts and media. The high- speed rotation combined with the changing polarity of the magnets create a spinning and hopping action of the magnetic stainless steel pin media. The smaller (.2 x 5mm to 1.5 x 5mm) 304 stainless media pins spin and hops by the slower rotating parts, deburring the smaller intricate areas in as little as 10 to 20 minutes.

img_0435

The spinner is an excellent choice for  burr removal in slots, small-drilled holes, threads, cross-holes, knurled areas, small gears, and internal cavities. The spinner works well on aluminum, brass, copper, stainless, and titanium parts.

Leave a Reply

Your email address will not be published.